Hilti POS 150 Manuel D'utilisation page 30

5.1.2 Set-up with circular bubble level
When starting up the total station the circular bubble level displayed on the screen must be centered by
turning the tripod footscrews.
5.1.3 Setting up over a mark on the floor or ground using the laser plummet
The tool should always be set up over a point marked on the floor or ground so that in case of measurement
deviations it is possible to fall back on the data for the station or orientation point.
The tool features a laser plummet that is switched on automatically together with the tool.
5.1.4 Control panel on the controller 8,
The control panel on the controller consists of a total of 7 buttons with symbols plus a touch screen for
interactive operation.
Function buttons on the controller → page 24
Function buttons on the controller
5.1.5 Indicators and controls on the POC 100 controller touchscreen
1. Information bar
2. Battery status, wireless connection and measuring target status
3. Menu display (action, time and date)
4. Various applications
5. Button bar
5.1.6 Indicators and controls on the POC 200 controller touchscreen
1. Information bar
2. Battery, status of radio connection and measurement target, time
3. Activated menu
4. Function buttons
24 English
Confirms the selected display.
9
Switches the tool on or off
Switches the display backlight on or off
Calls up the FNC menu for additional settings
Cancels or ends all active functions and returns to the start menu
User-configured function button
User-configured function button
Control and prism search function button
10
2035736
*2035736*