Putting Out Of Operation - Abicor Binzel iROB Feed 22/MP Mode D'emploi

iROB Feed
Symbol

8 Putting out of operation

As this is a complete system, the individual components can be switched off only in combination with each
other.
NOTICE
• Observe the operating instructions of the welding components, such as the robot welding power
BAL.0331.0 • 2019-03-11
Pos. Designation
(4) Control lead connection intermediate cable assembly
(5) Compressed air inlet
(3) Gas input
(9) Control lead connection welding torch
(2) Compressed air outlet
(10) Air-blast trigger: Press trigger for air flow.
(11) Gas test trigger: Press trigger for gas flow.
(12) Inching trigger: Allows a manually-controlled wire supply without gas flow.
Press trigger = wire is fed.
(13) Press (11) + (12) to transport the wire backwards.
, cooling unit
source iROB Pulse iROB Cool and welding torch.
8 Putting out of operation
EN - 21