Work Position; Automatic Shutdown Function - Husqvarna 325iLK+TAB850 Manuel D'utilisation

CAUTION: If the battery does not move
easily into the battery holder, the battery
is not installed correctly. This can cause
damage to the product.
3. Make sure that the battery is installed correctly.

Work position

• Hold the product with 2 hands.
• Hold the product on the right side of your body.
• Keep the cutting attachment below waist level.
• Keep body parts away from the hot surfaces.
• Keep body parts away from the cutting attachment.
Before you operate the product
• Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
• Do an overhaul inspection of the product.
• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Make sure that all covers, guards, handles and the
cutting equipment are correctly attached and not
damaged.
• Examine the trimmer head and cutting attachment
guard for damages or cracks. Replace the trimmer
head and cutting attachment guard if they have been
hit or if they have cracks.
To start the product
1. Push the power lever the start position.
2. Use the power trigger to control the speed.
1385 - 002 - 04.12.2019
To start the SavE function
The product has a power saving function. The SavE
function gives the longest operation time from the
battery.
1. Push the control lever to SavE symbol. The
maxspeed is now limited.
2. Push the Control lever to 1 or 0 to quit the SavE
function.

Automatic shutdown function

The product is equipped with a shutdown function that
deactivates the product if it is not used.
Grass trimming with a trimmer head
To trim the grass
1. Hold the trimmer head immediately above the
ground at an angle.
Do not push the grass trimmer line into the grass.
2. Decrease the length of the grass trimmer line by
10-12 cm (4-4.75 in) and decrease the motor speed
to decrease the risk of damage to plants.
13