Publicité
7 Mise en service
7.13.5
Tableaux des paramètres xBPI
7.13.5.1
Paramètres de pesée
Minebea Intec
Les paramètres à saisir sous [Weighing point]- [Weighing point A]- [xBPI-Scale]- [Setup]-
[Configuration]- [Weighing parameters]/[Application settings]/[Interface settings] sont
listés dans les tableaux suivants.
[Weighing parameters]
— Ambient conditions
— Very stable cond.
— Stable conditions
— Unstable cond.
— Very unstable cond.
— Application/Filter
— standard mode
— manual filling
— automatic dosing
— checkweighing
— Stability range
— 0.25 digit
— 0.5 digit
— 1 digit
— 2 digit
— 4 digit
— 8 digit
— Stability symb.delay
— no delay
— short delay
— long delay
— extrem long delay
— Tare parameter
— at any time
— not until stable
— Auto zero function
— Auto Zero on
— Auto Zero off
— Adjustment function
— ext.adj.w.fact.wt.
— ext.adj.w.user.wt.
— ext.adj.w.pres.wt.
— internal adjust
— ext.lin.w.fact.wt.
— ext.lin.w.pres.wt.
— Confirm preload
— Delete preload
— adjust disabled
— Confirming adjust.
— automatically
— manual
— Zero range
— 1% of max load
— 2% of max load
Transmetteur série PR 5220
FR-109
Publicité
