Troubleshooting - Toshiba Carrier MMD-AP0076BHPUL Manuel D'installation

12

Troubleshooting

Confirmation and check
When an error occurred in the air conditioner, an error
code and indoor UNIT No. appear on the display part
of the remote controller.
The error code is only displayed during the operation.
If the display disappears, operate the air conditioner
according to the following "Confirmation of error log" for
confirmation.
Error code Indoor UNIT No. in
which an error occurred
47-EN
1116950170_01_EN.indd 24 1116950170_01_EN.indd 24
Confirmation of error log
When an error occurred on the air conditioner, the error
log can be confirmed with the following procedure.
(The error log is stored in memory up to 4 errors.)
The log can be confirmed from both operating status
and stop status.
2
3
1
1
When and buttons are pushed
simultaneously for 4 seconds or more, the
following display appears.
If is displayed, the mode enters in the error log
mode.
[01: Order of error log] is displayed in
CODE No.
[Error code] is displayed in CHECK.
[Indoor unit address in which an error occurred]
is displayed in Unit No.
2
Every pushing of button used to set
temperature, the error log stored in memory
is displayed in order.
The numbers in CODE No. indicate
CODE No. [01] (latest) → [04] (oldest).
REQUIREMENT
Do not push button because all the error log of the
indoor unit will be deleted.
3
After confirmation, push button to return
to the usual display.
– 24 –
EN
FR
ES
48-EN
10/21/20 12:31 PM 10/21/20 12:31 PM