Publicité
Les langues disponibles
Les langues disponibles
04 | FIRST STEPS
·
Before first use, please fully charge the built-in Li-Ion battery.
·
Only charge with the supplied USB charging cable
·
Never leave the ring light unattended while charging.
Insert the USB-C plug (07a) of the USB charging cable (07) into the USB-C port (06) of the LED selfie ring light. Connect the USB-A
plug (07b) to a USB socket on your computer. The charging process starts, and the LED indicator next to the USB-C port (06) lights up
red. When battery is fully charged, the LED indicator lights up green. Remove the USB cable. When the battery is totally empty, the
charging time by PC is about 2,5 hours.
05 | OPERATION
05.1 Switching On/Off
To switch on the LED selfie ring light, tap the On/Off button (04) and hold it for about 1 second. To switch off the ring light, tap on
the On/Off button (04) again.
05.2 Changing the light mode
To change the light mode, tap the light mode button (05) until the desired light mode lights up. There are 3 light modes available:
·
Warm light with approx. 3500 K colour temperature
·
Mixed light with approx. 4400 K colour temperature
·
Cold light with approx. 8500 K colour temperature
Warm Light
10
Mixed Light
Cold Light
doerr-foto.de
Publicité
