Publicité
Les langues disponibles
Les langues disponibles
GB
12 Back wheels
13 Collection bag
14 Rear impact protection
15 Cable holder
16 Connection cable l
17 On/Off button
18 Safety switch
19 Grass collection box carrying
handle
19a Phillips screw
20 Safety key
20a Opening for safety key
21 Locknut
22 Blade
Function Description
The cordless lawn mower has a cutting
tool, which turns parallel to the cutting lev-
el. It features a powerful electrical drive,
a sturdy plastic casing, a safety switch, a
collision guard as well as a grass box.
Additionally, the equipment is height
adjustable to 5 levels and has smooth-
running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical Data
Cordless lawnmower ..... DG-CLM 1833 Set
...................................................DG-CLM 1833
Motor voltage ................................ 18 V
Idling speed n
.......................... 2900 min
0
Idle time ............................. approx. 30 min
Cutting circle .................................330 mm
Cut height ..................................25-65 mm
Lawn bag volume ............................... 32 l
Protection class ......................................III
Protection type................................... IPX1
Weight (without battery/charger) ...... 11 kg
22
Sound pressure specification
(L
) ..................... 67.9 dB(A); K
pA
Noise level specification (L
guaranteed ...............................96 dB(A)
measured ...... 80.0 dB(A); K
Vibration (a
) at the curved handle
h
rechts ................. 0.73 m/s
links .................... 0.94 m/s
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
-1
on but running without any load).
Safety Information
This section covers the basic
safety regulations when working
with the device.
= 3 dB
pA
)
WA
= 2.36 dB
WA
; K= 1.5 m/s
2
2
; K= 1.5 m/s
2
2
Publicité
