Wacker Neuson PT2A Manuel D'utilisation page 5

PT2A / PT3A / PT4A
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
PT2A, PT2A(I)
PT3A, PT3A(I)
PT4A, PT4A(I)
A nameplate listing the model number, item number, revision number, and serial
Machine
identification number is attached to this machine. The location of the nameplate is shown above.
For future reference, record the serial number in the space provided below. You will
Serial number
(S/N) need the serial number when requesting parts or service for this machine.
Serial Number:
From this point forward in this documentation, Wacker Neuson Production
Machine

documentation Americas LLC will be referred to as Wacker Neuson.
Keep a copy of the Operator's Manual with the machine at all times.

For spare parts information, please see your Wacker Neuson Dealer, or visit

the Wacker Neuson website at http://www.wackerneuson.com/.
When ordering parts or requesting service information, be prepared to provide

the machine model number, item number, revision number, and serial number.
This manual provides information and procedures to safely operate and
Expectations

maintain the above Wacker Neuson model(s). For your own safety and to
for
information in
reduce the risk of injury, carefully read, understand, and observe all instructions
this manual
described in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,

even without notice, which improve the performance or safety standards of its
machines.
wc_tx004592en.fm
Item Number
5100042215, 5100042613
5100042216, 5100042614
5100042217, 5100042615, 5100042604
5
Foreword
wc_gr014833