Wacker Neuson PT2A Manuel D'utilisation page 22

Lifting and Transporting
3.2 Preparing the Machine for Transport on a Truck or Trailer
Requirements ■ Machine stopped
■ Flatbed truck or trailer capable of supporting the machine's weight
■ Chains, hooks, or straps capable of supporting the machine's weight
Before transporting the machine, check the following items:
Checklist
 Check that the transport vehicle or trailer can support the weight of the machine.
 Check that the transport vehicle or trailer is wide enough to support the
machine.
 Check that the wheels of the transport vehicle or trailer are chocked during the
loading process.
 Check that the transport vehicle or trailer is clean and free of grease, oil, ice,
and other loose material.
 Check that any ramps used in the loading process:
■ Can support the weight of the machine.
■ Are clean and free of grease, oil, ice, and other loose material.
■ Are securely connected to the transport vehicle or trailer.
■ Are of sufficient length to keep the loading angle 15° or less.
In addition:
 Check that the loading area is flat and the ground is stable.
 Check the overall height of the machine once it is loaded on the truck or trailer.
 Plan your travel route so there will be adequate clearance for overpasses, road
signs, buildings, etc.
 Check local regulations regarding transporting and obey these regulations.
PT2A / PT3A / PT4A
22
wc_tx004593en.fm