Puritan Bennett Breeze SleepGear Guide D'utilisation page 13

Breeze SleepGear
• Squeeze gently to disengage the two side latches.
• Rotate the DreamSeal away from the shell.
• Disengage the lip on the bottom of the DreamSeal from the
notch on the bottom of the shell.
3. Disconnect and remove the hose.
Caution: To avoid damaging the hoses when connecting or
disconnecting them, use the methods described in
the following instructions. Never pull on or twist the
ribbed portions of hoses. Refer to the figures below.
To remove the hose from the shell:
• Place your thumb and forefinger on the smooth end of the hose
where it attaches to the shell.
• Disconnect the hose from the shell.
• Slide the hose out of the hose guide.
To disconnect the hose at the swivel adapter:
• Grasp each hose at its rubber cuff.
• Gently pull hoses apart.
Cleaning
E n g l i s h
13