Publicité
Les langues disponibles
Les langues disponibles
1
Transparent cover
2
Programming segments
3
Time setting disk
4
Time setting mark
5
Heating operation indicator
6
Reduced temperature
control button
CONTENTS
Installation.
- Location.
- Electrical connections.
Setting the time and the current day.
Temperature control.
Mode selection.
Timer programming.
Technical characteristics.
INSTALLATION
Location:
The THERMOFLASH TS must be installed approximately 1.6 m
above the floor on an inside wall shaded from direct sunlight
and from all thermal influences such as lamps or a television set
etc.
Place it in a location that will allow you to open the two covers
9
(
and
) in the upward direction.
1
Electrical connections:
5 4
2
1
L
N
THERMOFLASH TS
INTRODUCTION
The THERMOFLASH TS allows control of
your heating system to suit your own
particular way of life, assuring your
comfort and improving energy mana-
gement.
It has been conceived for all types of
heating, i.e. gas, fuel oil or electric.
7
Mode selector
8
Comfort temperature control
button
9
Cover
10
Label ( brief instructions )
SETTING THE TIME AND THE CURRENT DAY
This must be done first!
- Raise the cover
1
- Pay attention to the mark
- Turn the time setting disk
hands on the current time.
Examples:
Daily model (24h.)
6 h 10 in the morning
12
9
3
6
Current time opposite
the marking
Weekly model (7 days)
12
9
3
6
Sunday (Day = 7)
9
6
Sunday, 22 h 00
The days of the week are represented by digits:
1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday,
6 = Saturday, 7 = Sunday.
4
when setting the time and day..
3
(in any direction) to position the
6 h 10 in the evening (18 h 10)
12
9
6
Current time opposite
the marking
Days of the
week
12
9
6
Thursday ( Day = 4)
9
Thursday, 14 h 00
3
3
6
Publicité
