Table des Matières
Publicité
IMPORTANT INFORMATION:
FOLLOW BEFORE INSTALLATION
WEIGHT CAPACITY: The weight capacity of the
300lbs/136kg – 400lbs/182kg on 22"/55cm.
23"/58cm – 29"/ 73cm is 550lbs/250kg with 4 point hardware.
Please note that the Quickfit mounting hardware on the
pre-assembled with the cane clamp in the rear most mounting position
to maximize seat depth of the wheelchair. See Fig. 1 below.
The configuration can be changed by orienting the Quickfit cane clamp
forward, providing a forward mounting position. See Fig. 2 below.
Note: The Quickfit mounting hardware provides 3"/ 7.6cm of depth
adjustment, in front of and behind the back canes.
To set the Quickfit mounting hardware in the forward most position:
•
Remove the cane clamp from the mounting plate
•
Rotate the cane clamp 180° and re-attach it to the mounting plate
•
Install clamp as shown in Fig. 2
FIG. 1: PIN LOCATION FOR ALL BACKS
EXCEPT PEDIATRIC AND ARMADILLO
Please Note: Setting the desired position of the
compromise the stability of the wheelchair.
Be aware that the forward and aft position for the backrest will change
the user's centre of gravity within the wheelchair. A back set in the most
rearward position can significantly reduce the rearward stability of the
wheelchair. In contrast, a more forward back position may reduce the
wheelchair's forward stability.
6"
3 7/8"
FIG. 2: PIN LOCATION FOR PEDIATRIC
AND ARMADILLO BACKS
BACK POST CENTRELINE
nxt
Back is
nxt
Back are
nxt
back may
5
Publicité
Table des Matières
