Support De Tête - Dynamic next SEATING Serie Manuel D'utilisation

3. Head Rest Mounting
The Upper and Middle segments
of the Armadillo shell have slots
to accept mounting hardware
for the nxt MultiFit Head Rest.
Choose the location which
provided the best positioning for
3. Head Rest Mounting
3. Head Rest Mounting
the head rest.
The Upper and Middle segments of the MAPS shell have slots to accept mounting hardware
The Upper and Middle segments of the MAPS shell have slots to accept mounting hardware
for the nxt MultiFit Head Rest. Choose the location which provided the best positioning for
for the nxt MultiFit Head Rest. Choose the location which provided the best positioning for
the head rest.
the head rest.
UPPER
UPPER
LATERAL
LATERAL
LATERAL
SUPÉRIEUR
LOWER LATERAL
LOWER LATERAL
WITH LARGE PAD
WITH LARGE PAD
BAS LATERAL AVEC
GRANDCOUSSIN
4. Lateral Installation and Adjustment
4. Lateral Installation and Adjustment
Upper laterals are held in place by screws B and the Lower laterals by screws E. These
Upper laterals are held in place by screws B and the Lower laterals by screws E. These
screws thread into sliding nuts in slots on the laterals allowing the laterals to be infinitely
screws thread into sliding nuts in slots on the laterals allowing the laterals to be infinitely
4. Lateral Installation and
adjustable between their most inner and outer positions only limited by the postural
adjustable between their most inner and outer positions only limited by the postural
requirements of the occupant of the wheelchair and any structural components of the
Adjustment
requirements of the occupant of the wheelchair and any structural components of the
wheelchair. Loosening screws B or E allowing the laterals to slide will not affect the
wheelchair. Loosening screws B or E allowing the laterals to slide will not affect the
Upper laterals are held in place
positioning of the mounting hooks.
positioning of the mounting hooks.
by screws B and the lower laterals
by screws E. These screws thread
into sliding nuts in slots on the
laterals allowing the laterals to be
5. Angle Adjustments
5. Angle Adjustments
infinitely adjustable between their
The Upper and Lower segments of the MAPS
most inner and outer positions
The Upper and Lower segments of the MAPS
shell are individually angle adjustable with
shell are individually angle adjustable with
respect to the Middle segment. Loosening
only limited by the postural
respect to the Middle segment. Loosening
screws G (on both sides of hinge joint) allows
requirements of the occupant of
screws G (on both sides of hinge joint) allows
the Upper segment to be tilted forward up to
the Upper segment to be tilted forward up to
the wheelchair and any structural 40 degrees or backward up to 20 degrees.
40 degrees or backward up to 20 degrees.
Loosening screws F (on both sides of hinge
components of the wheelchair.
Loosening screws F (on both sides of hinge
joint) allows the Lower segment to be tilted
Loosening screws B or E allowing
joint) allows the Lower segment to be tilted
forward or backward up to 30 degrees.
forward or backward up to 30 degrees.
Tightening the screws locks the segment
the laterals to slide will not affect
Tightening the screws locks the segment
preventing a change in angle. Ensure all 8
the positioning of the mounting
preventing a change in angle. Ensure all 8
screws are tightened.
screws are tightened.
hooks.
B
B
E
E
FRONT VIEW
VUE DE FACE
Support de tête
Support de tête Les segments supérieur
et central de la coque Armadillo ont
des fentes pour accepter le matériel de
montage pour le repose-tête MultiFit
de nxt. Choisissez l'emplacement qui a
fourni le meilleur positionnement pour
le repose-tête.
FRONT VIEW
Installation et réglage latéraux
Les latéraux supérieurs sont
maintenus en place par les vis B
et les latéraux inférieurs par les
vis E. Ces vis se vissent dans les
écrous coulissants dans les fentes
latérales, ce qui permet de régler les
UPPER SEGMENT
latéraux entre leurs positions les plus
UPPER SEGMENT
internes et externes uniquement en
HINGE JOINT
HINGE JOINT
fonction des exigences posturales de
l'occupant du fauteuil roulant et des
composants structurels du fauteuil
roulant. Desserrer les vis B ou E en
HINGE JOINT
faisant glisser les latéraux n'affectera
HINGE JOINT
pas le positionnement des crochets
de montage.
LOWER SEGMENT
LOWER SEGMENT
B
B
UPPER
UPPER
LATERAL
LATERAL
LATERAL
SUPÉRIEUR
LOWER LATERAL
LOWER LATERAL
WITH LARGE PAD
WITH LARGE PAD
BAS LATERAL AVEC
GRANDCOUSSIN
E
E
G
G
F
F
15