Miele XKM 3200 WL LMD Mode D'emploi page 51

Activating the
configuration
Fault 559
The interface configuration is only effective after the cleaning machine
has been restarted.
Wait approx. 10 seconds before switching the cleaning machine off

for a restart.
Switch the cleaning machine off and then back on again with the

 button.
Wait approx. 90 seconds for the module to initialise.

Then check if the interface is working.

If the fault message
programme is interrupted with this message, the RS232 interface is
activated and must be deactivated.
Open the menu for configuring the RS232 interface via

tings Interface
/ .
Ethernet
Select the

The RS232 interface is deactivated. After around 90 s, the module is
ready for operation.
en - Network connection
Fault 559 is displayed during commissioning or a
option and confirm your choice with OK.
Further set-
51