Miele XKM 3200 WL LMD Mode D'emploi page 50

en - Network connection
Selecting settings
50
Document all settings in case technical support is required at a
later date.
DHCP must be deactivated prior to manual intervention.
Select the DHCP option and confirm your choice with OK.

Off
Select the option and confirm your choice with OK.

The following settings are then available for selection:
IP address
-
- Subnet mask
Standard gateway
-
DNS server automatic
-
DNS server 1
-
- DNS server 2
- Port type (not relevant)
Port
- (not relevant)
Select an option and confirm your choice with OK. You can then

make the following settings according to the information displayed
on the screen.
IP address
To enter the
following information:
The current setting is shown on the middle line of the display. It can
be changed using the options shown in the bottom line. The top line
shows which option has been selected from the bottom line. The fol-
lowing data entry options are available:
- Numbers from 0 to
.
- Decimal point " ".
- Use the  symbol to delete the last position.
OK
- Select the symbol on the display to save the setting. The dis-
play will then revert to the main menu.
- Select the  symbol on the display or use the  button to exit the
process without saving the setting(s) made. The display reverts to
the main menu.
IP address Subnet mask
The ,
IP address
the is 192.168.1.23, for example, enter
192.168.001.023 .
Use the arrow buttons  (right) and  (left) to move the cursor to

the option you require.
Confirm each entry with OK.

To save your entries, select the

firm with the OK button.
Subnet mask
, etc., the display contains the
9 .
, etc. must always be entered in full. If
OK
symbol on the display and con-