Left Back Panel - Twin-Star 28MM468 Manuel D'instruction

9. Locate Left Back Panel (I), attached to the
left back of the completed assembly from
step 8, using a Phillips Head screw driver,
screw Screws (Q) through the pre-drilled
holes in the Left Back Panel to the
completed assembly.
10. Locate Right Back Panel (P), attached to the
right back of the completed assembly from
step 8, using a Phillips Head screw driver,
screw Screws (Q) through the pre-drilled
holes in the Right Back Panel to the
completed assembly.
11. If you are wish to use the Wood Door with
this fireplace, please skip step 9 and
proceed to step 10 of the installation.
This mantel comes with 3 types of door
panels for your reference. The Wood Door
Panel comes pre-installed. Follow the
below-mentioned instructions in order to
replace with Glass Door Panel (X)
or Speaker Grill Door Panel (Y) .
a. Untighten screw from clips.
b. Remove Wood Door panels from door
frame.
c. Replace with Glass or Speaker Grill door
panels.
d. Tighten the screw through the clips
E-4
All manuals and user guides at all-guides.com
I
P
Right
Back
Panel
X
Wood
Door
Glass
Door
Panel
Screw
Q
I
Left
Back
Panel
Speaker
Grill Door
Panel
Y