Left Side Panel; Right Side Panel; Mantel/Top - Twin-Star 28MM468 Manuel D'instruction

4. Locate Hearth/Base (A) and set out finished
side up on the floor.
5. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
6. Attach the Completed Center Front assembly
from step 3 to the Hearth/Base (A). Make
sure that dowels are seated into the
pre-drilled holes in the Hearth/Base. Using
Bolts (L) and Washers (M) attach panels
through pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
7. Locate Left Side Panel (E) and Right Side
Panel (F), insert one Wood Dowel (N) into
each of the pre-drilled holes on the bottom
edge of the panels. Then use Bolts (L) and
Washers (M) through the pre-drilled holes
in the mounting blocks. Attach the Side
Panels to Hearth / Base (A).
HAND TIGHTEN ONLY.
8.
Insert one Wood Dowel (N) into each of
the pre-drilled holes on the top edges of
the Assembly from step 7. Then locate
Mantel/Top (G) and lay finished side up
on top of completed assembly. From the
inside, attach Mantel/Top (G) using
Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
All manuals and user guides at all-guides.com
Right
Side
Panel
N
N
F
N

Mantel/Top

G
N
N
N
M
L
Left
Side
Panel
E
L
M
N
A
N
N
N
N