MARTINS Industries MW-60 Manuel page 4

Dimensions (L x W x H)
Weight
Color
Max outlet air pressure
Max inlet air pressure
Accuracy
Watt
CFM
Supply voltage
Temperature range
Relative Humidity
Material
Degree of Protection
SAFETY
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted.
Do not modify or use this product for any other application than what it has been designed for.
During inactivity period, please package the inflator and keep it away from damp, heat, impact, etc.
Ensure that the product is connected to the correct power and air supply; refer to rating label and general specifications.
Important compressed air contains water and oil, use proper air filter between the source and device. Failure to do so will
void the warranty.
Do not exceed MAX inlet air pressure (see specs. p. 02)
Keep the compressed air inlet pressure within 1035 kPa / 10.5 BAR / 150 PSI / 10.5 kg/cm
1800 kPa / 18 BAR / 261 PSI / 18.36 kg/cm
Always use a Martins Industries' safety cage to inflate your tire.
MW-60
23 X 27 X 8.5 cm
9" X 10.5" X 3.5"
6 KG / 14 LB
Blue
1000 kPa / 10 BAR /
145 PSI / 10.2 kg/cm
2
1035 kPa / 10.5 BAR /
150 PSI / 10.5 kg/cm
2
+/-1.99 kPa / +/-0.02 BAR
+/-0.29 PSI / +/-0.02 kg/cm
10 Watt Max
2600 L / min = 92 CFM MAX
AC 110 ~ 240 V / 50 ~ 60 Hz
800 mA Max
-10 °C ~ 50 °C / 14 °F ~ 122°F
up to 95 % RH non-condensing
Die cast Aluminum Enclosure
IP66
BEFORE using this product, read this manual and follow all its Safety and Operating
instructions. Failure to do so may result in personal injury and/or property damage.
Retain these instructions for future reference.
(MW-64HP).
2
MW-64HP
23 X 27 X 8.5 cm
9" X 10.5" X 3.5"
6 KG / 14 LB
Yellow
1600 kPa / 16 BAR /
232 PSI / 16.32 kg/cm
1800 kPa / 18 BAR /
261 PSI / 18.36 kg/cm
+/-1.99 kPa / +/-0.02 BAR
+/-0.29 PSI / +/-0.02 kg/cm
2
10 Watt Max
2600 L / min = 92 CFM MAX
AC 110 ~ 240 V / 50 ~ 60 Hz
800 mA Max
-10 °C ~ 50 °C / 14 °F ~ 122°F
up to 95 % RH non-condensing
Die cast Aluminum Enclosure
IP66
MW-60-4WAY
23 X 27 X 8.5 cm
9" X 10.5" X 3.5"
7.2 KG / 16 LB
Orange
1000 kPa / 10 BAR /
145 PSI / 10.2 kg/cm
2
1035 kPa / 10.5 BAR /
150 PSI / 10.5 kg/cm
2
+/-1.99 kPa / +/-0.02 BAR
+/-0.29 PSI / +/-0.02 kg/cm
2
10 Watt Max
3600 L / min = 128 CFM MAX
AC 110 ~ 240 V / 50 ~ 60 Hz
800 mA Max
-10 °C ~ 50 °C / 14 °F ~ 122°F
up to 95 % RH non-condensing
Die cast Aluminum Enclosure
IP66
(MW-60 & MW-60-4way) and within
2
2
2
2