Installation
3.10 Water filter
(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
3.10.1 Attaching the internal
filter into the refrigerator
1. Pull the water filter cover slowly.
2. Remove the water filter bypass cover by turning
it downwards.
A
WARNING:
is enabled before removing the by-pass
cover.
C
It is normal that a few drops of water drip
after the cover has been removed.
3. Seat the water filter cover into the mechanism
and push forwards to lock it in place.
4. Press "Ice Off" button on the display again to
exit this mode.
12 /37 EN
Ensure that the Ice Off mode
Refrigerator / User Manual