Block Diagram; Configuration / Operating The Function Keys - PR electronics PReasy 4131 Mode D'emploi

BLOCK DIAGRAM

42 42
2-wire transmitter
Current
Documentation for routing diagram.
Voltage
In general:
Potentiometer
When configuring the 4131, you will be guided through all parameters and you
Configuration is carried out by using the 3 function keys:
When configuration is completed, the dispaly will return to the default state 1.0.
Pressing and holding
If no key is activated for 1 minute, the display will return to the default state
Further explanations:
Fast setpoint adjustment and relay test: These menus allow you to make a
Pressing
Pressing
Holding down
Password protection: Programming access can be blocked by assigning a
CONFIGURATION /
OPERATING THE FUNCTION KEYS
can choose the settings which fit the application. For each menu there is a
scrolling help text which is automatically shown in line 3 on the display.
will increase the numerical value or choose the next parameter
will decrease the numerical value or choose the previous parameter
will save the chosen value and proceed to the next menu
will return to the previous menu or return to the default
state (1.0) without saving the changed values or parameters.
(1.0) without saving the changed values or parameters.
quick setpoint change and relay test when the FastSet menu is activated.
This function can only be activated when the relays are set for setpoint
function and are controlled by a setpoint.
and simultaneously will activate a relay test and change the
state of the relay.
will save the setpoint change.
for more than 1 second will return the unit to the default state
without saving the setpoint change.
password. The password is saved in the transmitter in order to ensure a high
degree of protection against unauthorised modifications to the configuration.
Default password 2008 allows acces to all configuration menus.
43 43