fisair DIPHUSAIR-MT2 Manuel D'installation Et De Maintenance page 128

Humidificateurs isothermiques par injection de vapeur sèche
Table des Matières

Publicité

5.
Make sure that the spindle is fully retracted into the actuator and handle is up so that the spring is
secured in place.
Fig. 7
6.
Place the mounting flange and actuator over the valve bonnet thread.
7.
Refit the actuator retaining nut and tighten (50 Nm for M34).
Fig. 8
IM-P344-01 CTLS Issue 7
AEL3 Electric Linear Actuators
Warning
Risk of injury due to limbs being trapped
• Avoid contact with the danger areas.
45°
45°
click
13

Publicité

Table des Matières
loading

Table des Matières