Alcatel Pop 7 LTE Mode D'emploi page 47

• Enter a name, and touch RENAME to confirm.
To make device visible
• Turn on Bluetooth.
• Touch your device to make it visible or invisible.
To pair/connect your tablet with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on
and pair your tablet with the Bluetooth device with which you want
to exchange data.
• Drag down notification panel, and touch
settings panel, then touch
• Turn on Bluetooth, your tablet will searching the available devices
automatically.
• Touch a Bluetooth device you want to be paired with in the list.
• A dialogue will popup, touch PAIR to confirm.
• If the pairing is successful, your tablet connects to the
To disconnect/unpair from a Bluetooth device
• Touch the Settings icon
• Touch FORGET to confirm.
7.3 Connecting to a computer
With the USB cable, you can transfer media files and other files
between microSD card/internal storage and computer.
Before using MTP or PTP you should firstly mark USB debugging.
• To access this function, touch Settings\About tablet, then touch
Build number 7 times. Now you may touch Settings\Developer
options\USB debugging.
To connect/disconnect your tablet to/from the computer:
• Use the USB cable that came with your tablet to connect the tablet
to a USB port on your computer. You will receive a notification that
the USB is connected as a media device.
to access Settings.
beside the device you want to unpair.
47
to switch to Quick
device.