Wilson Electronics PRO Serie Guide D'installation page 12

Fixing Red Light Issues
If the power light is red:
1. Make sure all connections are tight.
2. You need to increase the distance between the outside antenna and the inside antenna
by moving them horizontally and/or vertically farther apart. After doing so, reset the
booster by unplugging the power supply and then plugging it back in. If the light is
green after separating the antennas, you have eliminated the problem.
3. If your coverage area is still too small after separating the antennas contact the Wilson
Electronics Customer Support Team for assistance: 866-839-9361.
Fixing Orange Light Issues
If the power light is orange:
1. It will be necessary to turn the outside antenna away from the nearby cellular signal
in small increments until the light turns green. If the Signal Booster will not respond,
relocation of the outside antenna may be required.
2. If the light remains orange, contact the Wilson Electronics Customer Support Team for
assistance at 866-839-9361.
About Wilson Electronics
Wilson Electronics, LLC has been a leader in the wireless communications industry for over
40 years. The company designs and manufactures Signal Boosters, antennas and related
components that significantly improve cellular telephone signal reception and transmission
in a wide variety of applications, mobile (marine, RV, vehicles) and in-building (home, office,
machine to machine).
With extensive experience in antenna and Signal Booster research and design, the company's
engineering team uses a state-of-the-art testing laboratory, including an anechoic chamber
and network analyzers, to fine-tune antenna designs and performance. For its Signal Boosters,
Wilson Electronics uses a double electrically shielded RF enclosure and cell tower simulators
for compliance testing.
Wilson Electronics Signal Boosters feature patented SmarTech
automatically adjust their power based on cell tower requirements. By detecting and preventing
oscillation (feedback), signal overload and interference with other users, these SmarTech
Signal Boosters improve network cell phone areas without compromising carrier systems.
All products are engineered and assembled in the company's 100,000 square-foot
headquarters in St. George, Utah. Wilson Electronics has product dealers in all 50 states as
well as in countries around the world.
11
Contact Wilson Electronics Customer Support Team with any questions at
866-294-1660 or email: tech@wilsonelectronics.com
®
that enables them to
®