Niko 05-200 Mode D'emploi page 57

05-200
5. hoW is The Pc-Link seT uP?
start-up & test
Switching on the device for the first time will start a test automati-
cally! The LCD will briefly display the name of the device and the
corresponding software version.
This test takes a few seconds; the device then starts its standard
operation and displays the main screen
setting the time
Because it is a 24h clock, there is no AM or PM indication.
1. Press briefly
2. Press briefly
3. Press briefly
4. Press briefly
5. Repeat 3 & 4 until the time is set.
6. Press briefly
EN
and select the menu item.
in order to set the time.
and change the flashing value.
in order to select the next number.
the time is stored, return to the main screen.
Niko nv-sa
PC-Link v 3.0
M 01/01/2003
00:00:00 A
[ SET TIME ]
Set Date
SET TIME
11:53
SET TIME
21:53
SET TIME
21:53
SET TIME
21:53 [ > ]
M 01/01/2003
21:53:00 A
55