SCHUBERTH C5 Mode D'emploi page 69

5. Ensure that the anti-fog lens sits snugly
on the visor. If this is not the case, the
tension on the anti-fog lens can be increased
or decreased, as necessary, by turning the
eccentric holding pin.
Removal
1. Before starting to remove the antifog lens, first lay the visor on a soft,
clean cloth so that its top edge is facing you.
2. To reduce the pretensioning of the
antifog lens slightly if necessary, use the
balls of your thumbs to carefully bend
the visor sufficiently apart while applying
pressure with your thumbs to release the
anti-fog lens and move it approx. 2–3
mm forward.
3. Now grip the back of the anti-fog lens
with your index and middle fingers and
lift it off the visor. In this position you
can easily remove the anti-fog lens from
the locking pin with your thumb.
4. You can now remove the anti-fog lens
from the visor.
EN
67