Accessories; Special Accessories; Operating Principle; Operation - AJ Madison VK 230 714 Guide D'utilisation Et D'entretien

Accessories

As standard, your device comes with the following
accessories:
Cooking insert, perforated
Cooking insert, unperforated
Glass cover
Hand grip
Residuary filter

Special accessories

You can order the following accessories from your
specialist dealer:
AG 050 000 Drain installation set with lockable
check valve, outlet fitting (DN 40) and
connecting sleeve (½" to 1½")
AG 060 000 Drain installation set, allows the
draining of cooking fluid into an
appropriate container.
FK 023 000 Pasta basket
GE 020 010 Cooking insert, unperforated
GE 020 020 Cooking insert, perforated
VD 201 014 Appliance cover made of stainless steel
VD 201 034 Appliance cover made of aluminum
VV 200 014 Connection strip made of stainless
steel, for combining with other Vario
appliances
VV 200 034 Connection strip made of aluminum, for
combining with other Vario appliances
Use the accessories only as indicated. The
manufacturer assumes no liability for incorrect usage
of the accessories.
8

Operating principle

You can use the steamer to steam, boil, poach and
blanch.
Steaming is cooking in hot water vapor. The
temperature range is around 210°F The water vapor
transfers the heat. Suitable foods include vegetables,
potatoes and fish.
The steam surrounds the food and prevents it from
losing its nutrients. The food maintains its form, color
and typical flavor. Food isn't browned in the steamer.
The appliance offers you the option of non-
pressurized steaming inside of one or two cooking
inserts. With the perforated cooking inserts, the
steam can reach the food from all sides. This ensures
that even large quantities are evenly cooked.
You can set the temperature of the cooking liquid
between 100 - 200°F, in 10°F increments. Precise
setting of the water temperature allows you to melt
couverture chocolate, poach meat or cook noodles.

Operation

Before first use

Bear in mind the following instructions before
steaming for the first time:
1
Thoroughly clean the appliance and accessories.
2
When setting it up, a boiling point calibration
must be carried out.
Note:
Steaming without first conducting the
boiling point calibration can cause the appliance
to malfunction. It is possible that too much or too
little steam is produced.
3
After the boiling point calibration, fill the cooking
basin with water up to the overflow edge and run
the appliance at steam cooking level for
30 minutes to eliminate potential smells of
newness. Drain the water and thoroughly dry the
cooking basin.