Publicité
Les langues disponibles
Les langues disponibles
It is advisable to wait for the stove to completely
cool before re-igniting it again.
The stove should always be turned off strictly in
accordance with the above, and absolutely not by
disconnecting it from the mains power.
15.5 OPERATION WITH ROOM PROBE
ON STOVE
The stove can be switched on/off manually or
programmed.
The stove modulates the power according to
the room temperature detected by the probe on
board (i.e. the stove attempts to maintain the
desired temperature by consuming as little fuel as
possible).
If the user has enabled the "Standby" function,
rather than modulate, the stove will turn off
when the set temperature is reached, then
re-ignite when the ambient temperature falls
below the set delta.
The desired ambient temperature can be set using
the keys
.
25
10/2021 - EN
Publicité
