habitat et jardin USAIN Mode D'emploi page 7

STEP 4：
STEP 5：
Please make sure all parts have been fixed properly. Before you use the treadmill,
please read the instruction carefully
7
1. Using the 5# Allen wrench (12), screw in
the Bolt M8*16 (70) and Lock washer(67).
2. Attach the Right Upright Tube to the
Main
Frame;
3. Use the 5# Allen wrench (13) to screw
Bolt M8*16 (55) and Lock washer (67) to
the base frame through base and right
upright tube. Reference the picture left.
Repeat this method for the left side
assembly.
Note: Support the upright with your hands
to prevent it falling down and causing
injury
put the safety key (38)on the
computer and start
exercise.
your