habitat et jardin USAIN Mode D'emploi page 18

Center The Running Belt
Place treadmill on a level surface. Run
Treadmill at approximately
checking the running condition.
If the belt has drifted to the right, turn the
right adjusting bolt 1/4 turn clockwise, then
start running until centering the belt. Pic. A
If the belt has drifted to the left, turn the
left adjusting bolt 1/4 turn clockwise ,then
start running until centering the belt .Pic B
Timely adjust the tightness of the belt ,if
need , turn the left and right adjusting bolt
1/4 turn clockwise ,then re-start running,
confirm the belt-tightness until the belt be
right tightness. Pic C
18
6-8KM/H,