Playbrush PBR2 Manuel page 8

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
No changes shall be made to the equipment without the manufacturer's permission as this
may void the user's authority to operate the equipment.
This device has been designed and complies with the safety requirements for portable RF
exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01.
RSS Compliance Statement
This device complies with Industry Canada's license-exempt RSS. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
This device has been designed and complies with the safety requirement for RF exposure in
accordance with RSS-102, issue 5 for portable conditions.
Battery
This product contains a non-serviceable, rechargeable lithium ion battery. DO NOT attempt
to open or disassemble the unit to replace or remove the battery yourself. Please refer to
original manufacturer for battery servicing and replacement. Follow safety instructions
above carefully. If fluid should leak from the unit or rechargeable battery, do not touch. If
fluid comes in contact with eyes, wash thoroughly with water and seek medical advice. Do
not rub eyes. If you suspect that the battery is faulty through unexpected behavior such as
not holding charge, please turn off and do not attempt to charge or use the product. Contact
the original product manufacturer immediately.
Recycling Disposal
This product contains rechargeable batteries. In the interest of protecting the environment,
please do not dispose of the product as household waste at the end of its useful life. This
product was produced after Jan 1 , 2006.
st
8