HMM Diagnostics smartLAB walk B Manuel D'utilisation page 41

Manually transfer all data
You can also manually trigger all data transfer to the receiving device. To do so, you
firsthavetoturnonSENDmodeonyoursmartLAB walk B device.
®
Please quickly press and release the "Disp/ Set" button, and then press it again for 6
seconds. In the upper display area "SEnd" appears.
If you now press „M/"twicethedisplaywillshow"picture8".
pict. 8
By pressing "Disp/ Set" again, you will manually trigger the all data transfer. The
symbol for wireless data transfer willflashinthedisplay.Ifthedatatransferwas
successful, you will see "picture 09"; if the data transfer could not be completed,
"picture 10" will appear on display. In case no connection at all can be established,
the display will show "picture 11".
41