HMM Diagnostics smartLAB walk B Manuel D'utilisation page 37

You have 2 different Bluetooth Smart setting modes:
1. Per 10 minutes mode (recommended)
2. Heart Beat mode
Setting the Per 10 minutes BLE mode:
In this mode data will be sent out every 10 minutes to the accordant receiving device.
All data which was stored during the last time interval will be sent out then. You can
see the automatic mode in picture 5. Switch the mode ON or OFF by using the "M/"
button.
It is recommended (Factory Setting) to keep this mode (ON) to enable data transfer.
pict. 5
37