Klarstein 10005399 Consignes D'utilisation page 10

1. Pull out the three screws from right hinge.
2. Remove the hinge (upper and lower) away, find the following in the carton:
One left hinge cover
Two left hinges (up one and low one)
Three self-screws
3. Install the door in suitable position with left hinges, use three self-screws to fix them. Then put
on the left hinge cover.
Installation of the lock & key
1. The diameter of the lock hole is: 18mm
2. The distance between the bottom edge and the middle of the lock hole is: 62mm
Changing the Swing Hinge
10