Chopin Mixolab 2 Installation Rapide Et Premier Test page 2

A. Contents
Mixolab 2
B. Installation
We recommend that the Mixolab 2 should be delivered and installed by an authorized CHOPIN Technologies technician.
Keep this packaging. It is essential to use it to transport the device.
Place the Mixolab 2 on a horizontal, stable surface.
• Leave space of at least 10 cm around the unit in all directions to
ensure effective ventilation.
• Do not place the Mixolab 2 in front of a window, especially if the
window is exposed to direct sunlight.
C. Connecting the water tube
1. Attach the movable parts of the quick connectors to the tubes and
lock them in place using the brackets.
2.
Connect the first tube from the "IN" connector of the recirculating
water chiller to the "OUT" connector of the Mixolab 2.
3. Connect the second tube from the "OUT" connector of the recirculating
water chiller to the "IN" connector on the Mixolab 2.
The Mixolab 2 can also be connected to a faucet. Nevertheless, it
is highly recommended to use a recirculating water chiller in order
to obtain precise, repeatable and reproducible results throughout
the year. An example of a suitable cryostat is the JULABO F250
F Class.
D. Connecting the power
1. Connect the device using the power cable supplied.
2. Connect to the PC via the USB port using the cable supplied.
INSTALLING YOUR MIXOLAB 2
Power cable
Shielded USB
cable
USB stick with
cle-usb-mixolab2.indd 2 27/03/2015 10:12:24
software and
user's manual
Nozzle cleaning
2 reinforced
tubes
Feed hopper Mixing bowl
tool
Cleaning brush
1
2