Troubleshooting Tips... Before you call for service
Problem
Clothes shrink
Some fabrics will naturally
shrink when washed. Others
can be safely washed, but
will shrink in the dryer.
Greasy spots
Improper use of fabric
on clothes
softener
Drying dirty items with clean
ones
Clothes were not completely
clean
Lint on clothes
Lint filter is full
Improper sorting
Static electricity can attract
lint
Overloading
Paper, tissue, etc., left in
pockets
Static occurs
No fabric softener was used
Overdrying
Synthetics, permanent
press and blends can cause
static
Collars and
The dryness monitor senses
waistbands still
that the body of the clothes
wet at end of
is dry
cycle
Slight variation
This is normal
in metallic color
Dryer continues
Ext Tumble was selected
to tumble after
display says
Complete
26
Possible Causes
What To Do
To avoid shrinkage, follow garment care labels exactly.
Some items may be pressed back into shape after drying.
If you are concerned about shrinkage in a particular
item, do not machine wash or tumble dry it.
Follow directions on fabric softener package.
Use your dryer to dry only clean items. Dirty items can stain clean
items and the dryer.
Sometimes stains which cannot be seen when the clothes are
wet appear after drying. Use proper washing procedures before
drying.
Clean lint screen before each load.
Sort lint producers (like chenille) from lint collectors (like corduroy).
See suggestions in this section under Static occurs.
Separate large loads into smaller ones.
Empty all pockets before laundering clothes.
Try a fabric softener.
Bounce
®
Fabric Conditioner Dryer Sheets have been approved for
use in all GE Appliances dryers when used in accordance with the
manufacturer's instructions.
Try a fabric softener.
Adjust setting to Less Dry or Damp.
Try a fabric softener.
Choose Quick Dry or Time Dry to dry damp collars and
waistbands. In the future, when drying a load with collars and
waistbands, choose More Dry.
Due to the metallic properties of paint used for this unique product,
slight variations of color may occur due to viewing angles and
lighting conditions.
Ensure Ext Tumble option is not selected.
49-90571 -1