Speck pumps Badu Jet Smart 1,6 kW Instructions De Montage Et Notice D'utilisation page 46

1
1
3
5
46
Annex I
Replacement of the pneumatic push button
Loosen the cable socket (1)
Loosen and unscrew the
pneumatic push button (2)
counter clockwise, by means of
a water pump pliers or a socket
spanner SW 34, a fork wrench
SW 34 or an adjusting spanner.
Pill out the pneumatic push
button (2) carefully together
with the hose over the water
level.
Screw in the pneumatic
push button (2), only tighten
by hand. Do not use force!
2
Tighten the cable socket (1)
Carefully pull back the hose
at the cable socket (1)
07.03.2014 TB-b bta badu jet smart_engl.indd
2
4
6
1
2