Publicité
Les langues disponibles
Les langues disponibles
Function Details
Easy Pairing
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
2. Keep headphone and your mobile phone as close
as possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click "Srhythm NC85" to pair.(the LED indicator
light will be blue flashing slowly after pairing
successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
Step 1:Pair NC85 with First device via Bluetooth
successfully and then turn off the First device's
Bluetooth.
Step 2:Pair NC85 with the Second device via
Bluetooth.
Step 3: Turn on Bluetooth of the first device and pair it
with headphone again.
Now both of your devices are paired with NC85 for
easy switching.
19
Active Noise Canceling(ANC) Mode
To turn on ANC, press the ANC Button when
Bluetooth turned on; Long press 3 seconds the ANC
Button when Bluetooth turned off ;
(the LED indicator light will be green when ANC ON)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when
ANC OFF)
Transparency Mode
Press the ANC button to switch between ANC mode,
Normal mode and Transparency mode
Wired Mode
Headphone support AUX input for wired external
audio source connection. Simply turn headphone
Bluetooth off and plug in the audio cable.
ANC also works in wired mode.Microphones only
works in Bluetooth mode,not for wired mode.
Please note that CAN NOT adjust volume on
headphones in wired mode.
20
Publicité
