RocHobby SCALER MB Manuel D'utilisation page 14

EN
UNFOLD THE CANVAS ROOF BRACKET
Step1: Pull out the canvas bracket.
Step 2: insert the canvas canopy bracket into the corresponding hole.
OPERATING THE VEHICLE
Step 1: turn on the transmitter, the headlamp of the transmitter will flash and enter the frequency matching mode.
Step 2: turn on the receiver switch, the headlight will flash and enter the frequency matching mode.
Step 3: when the transmitter and receiver are successful in frequency up, the front lights of the transmitter will be on
for a long time, and the front lights of the vehicle will be off.
14