Publicité
Les langues disponibles
Les langues disponibles
OPERATION AND FIRST IGNITION
PLACEMENT, MOVING and GAS TANK POSITION
PLACEMENT: With the heater in the upright position, adjust the feet (Figure 1) located on the bottom of the gas tank
compartment to prevent the device from swinging.
Figure 1
MOVING: For all the movements of the heater, for a safer and easier handling, we recommend using the moving
system (supplied as standard) called "KEMPER transport kit (Figure 2), tilt the heater to the operator as in the picture
(Figure 3), placing one foot on the "transport kit". The heater weighs approx. 30 kg.
EN
Figure 2
Figure 3
OPENING THE GAS TANK DOOR: To access the gas tank compartment, rotate the BLACK knob on the slotted panel.
GAS TANK POSITION: Place the gas tank inside the compartment and secure it with the chain (Figure 6).
Figure 6
Install on the gas tank the Pressure Reducing device Figure 7 (optional) suitable for the country of destination of the
product with EC approved gas pipe.
Figure 7
Page | 27
Publicité
