Gewiss JOINON WALLBOX I-CON PREMIUM Manuel D'utilisation Et D'installation page 79

NOTE=The FW update package(s) is/are inserted in the main folder of the microSD as shown in the example
below
MODIFYING THE OPERATING PARAMETERS OF THE RECHARGING STATION
17.
Once the product has been installed, certain station operating parameters can be modified via a text file to be saved
on the microSD card inserted in the charging station itself.
Use a computer to create a text file renamed "config.ini", where you can insert the parameters you want to modify. The
parameters must be added as indicated below.
The parameters that can be modified are:
Function description
Maximum input current MAXAMPEREAVAILABLE
Maximum recharging
current
Date and time
LOG level
Name of the Available options, and examples
parameter to be used
The input current set in the factory can be altered to suit
the real availability and avoid problems during recharging.
To do this, use the MAXAMPEREAVAILABLE parameter
Example
MAXAMPEREAVAILABLE=32
It is possible to define a recharging current different from
the one set in the factory. To do this, use the AM-
PERESOCKET_SX parameter
AMPERESOCKET_SX
Example
AMPERESOCKET_SX=10
If the station date is wrong, it can be updated using the
DATETIME value. The format is YYYY/MM/DD-hh:mm
DATETIME
Example
DATETIME=2021/01/31-14:00
The LOG level saved by the recharging station on the
microSD card can be modified using the LOGLEVEL
parameter. There are 2 options: 3 (limited wordiness) or 4
LOGLEVEL
(high degree of wordiness)
Example
LOGLEVEL=3
79