LENCO Xemio-861 Mode D'emploi page 8

C. About Player Battery
Player has an internal, non–user-replaceable battery. For best results, the
first time you use player, let it charge for about 3 ~ 4 hours or until the
battery status icon in the "Connect" screen shows that the battery is in full.
Note: Player may continue use battery power after it's been turned off. For
maintain the battery life and performance, if unit isn't used for a while, the
battery need to be recharged, recharging the battery at least once per
month.
a. Charging the Battery:
You can charge the player battery in two ways:
▪ Connect player to your computer. Or,
▪ Use the USB power charger. (not included)
Warning:
Better use the original USB cable delivered with your MP3 player. This cable
is a data and charging cable. Some other USB cables in the market are
charging only cables. If you use a charging only cable to transfer data from
your computer to your player, it will only show the battery symbol on the
screen and will not be detected by your computer as an external drive; this
means that you can not transfer any files from your computer to your MP3
player.
Note :
The player contains a built-in temperature monitor sensor. If it senses that
the battery pack temperature is not in good condition it will control and stop
the charging function. The charging function will be automatically restored
when the detected battery pack temperature returns to within normal
limits.
b. Connection and Charging:
▪ Once you have connected player with computer/power charger, then you
will see the "Choose connection" screen appear to choose and it will
switch to Charge & Transfer" mode automatically if no action in 4 ~ 5
seconds.
▪ Choose "Charge & Transfer" to upload or download the media files with
your computer and charging the Player's battery.
▪ Choose "Charge & Play" to operates the Player's function and the battery
charging in background.
Battery is full
8