Manual GHG 6.. ....R....
Flameproof Control Unit
Type Series GHG 6.. ....R....
Target group
Experienced electricians as defined by ElexV
and trained personnel.
Contents
1. Safety instructions
2. Conformity with standards
3. Technical data
4. Installation
5. Maintenance
1.
Safety instructions
This apparatus is not suitable for duty in Zone 0.
No changes to or modifications of the apparatus
are permitted!
Remember: Never leave this Instruction Manual
or other foreign objects inside the appartus!
Operate the control unit in undamaged and
clean condition, only for its intended purpose,
and only in ambient conditions the enclosure
material is capable of withstanding.
An incorrectly assembled control unit may no
longer meet the requirements of protection type
IP 54 as defined by EN 60 529: 1991.
Whenever work is done on the flameproof
control unit, be sure to observe the national
safety and accident prevention regulations
and the safety instructions given in this
Instruction Manual, which are stated in ital-
ics (like this paragraph)!
2.
Conformity with standards
This explosionproof, flameproof control unit
meets the requirements of EN 50 014:1997, EN
50 018:1994 and EN 50 019:1994.
Edition September 2000
Copyright
.
thuba Ltd., CH-4015 Basel
Switzerland
3