Charging The Battery In The Monitor; Mounting The Monitor - DNT Findoo Profiline Mode D'emploi

Accessories for 9mm camera
The accessory increases the diameter of the camera.
The accessories consist of 3 parts, a mirror, a magnet and a hook, which are all attached to the imager head
on the same way. The accessories have 1 mounting positions on the imager head.
Charging battery in the monitor
The monitor has a built-in Li-Ion battery. A fully charged battery is enough for approx. 2 hours.
Recharging the battery takes about 3 hours.
During charging the power LED indicates red.
The monitor can be used during charging.
Inspect the inspection camera before use and correct any problems to
reduce the risk of serious injury from electric shock and other causes and
prevents tool damage.

Mounting the monitor

The monitor can be operated wireless or fi xed on the hand grip. On the rear side of the hand grip are 4
connectors and a fi tting, where the monitor can be mounted.
close
Slide the monitor
downward
- 23 -
Getting started