Specifications; Plug Configurations; Electrical Rating Charts; Dimensions - Hatco RWM Série Manuel D'installation Et D'utilisation

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: The specification label is located on the back of the
unit. See label for serial number and verification of unit
electrical information.
Electrical Rating Chart
Model Voltage
RWM-1 100
RWM-1B
220
RCTWM-1B
230
240
RWM-2 100
RWM-2B
220
RCTWM-2B
230
240

Dimensions

Width
Model (A)
RWM-1
244 mm
RWM-1B
(9-5/8")
RCTWM-1B
RWM-2
498 mm
RWM-2B
19-5/8")
RCTWM-2B
A
C
D
Form No. WMCEM-0519
Watts Amps
740 7.4
823 3.7
900 3.9
980 4.0
1480 14.8
1647 7.5
1800 7.8
1960 8.2
Depth Height
(B) (C)
449 mm 204 mm
(17-11/16") (8-1/16")
449 mm 204 mm
(17-11/16") (8-1/16")
JIS C 8303
BS-1363
Plug Configurations
NOTE: Receptacle not supplied by Hatco.
Plug Configuration
JIS C 8303
CEE 7/7 Schuko, BS-1363, AS 3112
JIS C 8303
CEE 7/7 Schuko, BS-1363, AS 3112
Footprint Footprint
Width (D) Depth (E)
209 mm 284 mm
(8-1/4") (11-3/16")
463 mm 284 mm
(18-1/4") (11-3/16")
B
E
5

SPECIFICATIONS

CEE 7/7 Schuko
AS 3112
Unit Weight
7 kg (16 lbs.)
15 kg (33 lbs.)