TaoTronics TT-BA014 Mode D'emploi page 6

How to Use
Charging
1. Connect the Micro USB charging port with any active USB port via the included
charging cable, charging will start automatically.
2. The charging indicator will stay solid red during charging and turn off once charging is
completed.
Note:
• You can use the adapter while it is being charged. There might be current sound if
the battery level or quality is low.
• It is recommended to fully charge the adapter when using it for the first time or
before putting it away for storage.
• Charge the adapter at least once every 3 months when not using for a long time.
Pairing in TX Mode
1. Set the adapter to TX mode, connect it to your Non-Bluetooth audio transmitting
device.
2. Place your Bluetooth audio receiving device like earphones / speakers within 3 feet /
1 meter range and set it to pairing mode.
3. Turn on the adapter and tap Multifunction Button twice to enter pairing mode. The TX
indicator will flash fast blue. After approximately 10 seconds, pairing will complete
with the TX indicator staying solid blue.
Note:
• When connected with OPT Audio Input, please set your audio transmitting device to
PCM mode.
• The adapter is unable to pair with audio transmitting devices e.g. smartphone in TX
mode.
• To clear the pairing history in TX mode, tap and hold the Volume + for 7 seconds
with the TX indicator and charging indicator flashing twice at the same time.
Pairing in RX Mode
1. Set the adapter to RX mode, connect it to your Non-Bluetooth audio receiving device.
2. Turn on the adapter and tap the Multifunction Button twice to enter pairing mode with
the RX indicator flashing fast blue.
3. Activate Bluetooth function on your transmitting device (phone / tablet) and search for
nearby Bluetooth connections.
4. Find "TaoTronics TT-BA014" in the search results, tap on the name to connect. Once
connected, the RX indicator will stay solid blue.
Note: The adapter will try to re-pair the last connected device when turned on.
03/04