Sharp PA-VR10E PC Mode D'emploi page 34

Battery replacement procedure
Slide the battery cover in the direction of the arrow to
1
remove it.
Remove the used batteries.
2
Insert the new batteries.
3
Ensure that both replacement batteries are new and that they
are inserted with the correct polarity.
Fit the battery cover back in place.
4
The screen for setting the date and time appears on the
display.
To set the date and time, follow from step 5 of the procedure
on page E-10.
Dealing with problems
In very unusual circumstances, such as exposure to strong external
electrical interferences or a strong impact, all the buttons on the
recorder may cease to function. If this happens, reset the recorder
as described below.
Reset procedure
Using a ballpoint pen or similar tool, press the reset button
1
on the back of the recorder.
The "RESET?" message appears on the display.
Press the STOP/MENU button.
2
The screen for setting the date and time appears on the
display.
To set the date and time, follow from step 5 of the procedure
on page E-10.
E-32