Settings; Setting The Recording Mode - Sharp PA-VR10E PC Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

In this section it is explained how to select the settings required to
use the recorder's various functions.
Recording mode setting ............................... CODEC
Microphone sensitivity setting ..................... SENSE
Silence skip recording setting ...................... VAFON
Date and time setting .................................... CLOCK

Setting the recording mode

You can select HQ (high-quality recording), SP (standard-quality
recording) or LP (long-play recording) as the recording mode.
Press the STOP/MENU button once or
1
twice to display the menu screen.
Press the OK button.
2
The settings mode screen appears.
Press the
3
(recording mode settings) screen appears, then press the OK
button.
The recording mode setting screen appears.
The displayed setting changes in the
sequence shown below each time you
press the
HQ ↔ SP ↔ LP ↔ HQ...
Recording modes and recording times
HQ mode: Approx. 4 hours
SP mode:
LP mode:
Select a recording mode and press the OK button.
4
E-12

Settings

L
M
(+) or
(-) cursor button until the "CODEC"
L
M
(+) or
(-) cursor button.
Approx. 8.5 hours
Approx. 28 hours
Screen display
SET
Recording
mode indicator
CODEC
HQ mode: Records at
the recorder's highest
quality.
SP mode: Records at
the recorder's standard
quality.
LP mode: Records for a
l o n g t i m e b u t a t
reduced quality.

Publicité

Table des Matières
loading

Table des Matières