To Clean The Bowl, Bowl Lid, Drive Shaft And Feeder Tool; To Clean The S-Blade Accessory And Plastic Blade Accessory; To Clean The Disc Accessories; To Clean The Blender Accessory - Menuett 007845 Instructions D'utilisation

4.2.1 To clean the bowl, bowl lid, drive shaft and
feeder tool
1
Remove all scraps of food.
2
Clean all parts separately with hot water and
washing-up liquid.
3
Make sure that the lock system on the bowl and bowl
lid is clean and not blocked.
4
Use a dry and clean cloth to make the parts dry.
4.2.2 To clean the S-blade accessory and plastic
blade accessory
Warning! The blade accessories have sharp edges.
Do not touch the sharp edges.
1
Remove all scraps of food.
2
Clean the accessories with hot water and washing-up
liquid.
3
Use a dry and clean cloth to make the parts dry.

4.2.3 To clean the disc accessories

Warning! The disc accessories have sharp edges. Do
not touch the sharp edges.
Note! Some food items can cause discoloration to the disc
accessory holder. This is normal and does not affect the
function or taste of food. Remove stains with a cloth dipped
in vegetable oil.
1
Remove all scraps of food.
2
Remove the disc accessory from the disc accessory
holder.
3
Clean the disc accessory and disc accessory holder
with hot water and washing-up liquid.
4
Use a dry and clean cloth to make the parts dry.

4.2.4 To clean the blender accessory

1
Operate the product for a few seconds with a small
amount of hot water in the blender accessory. Refer
to "3.7 To use the blender accessory" on page 41.
43
2
Clean the blender container, blender lid and
measuring cup separately with hot water and
washing-up liquid.
3
Use a dry and clean cloth to make the parts dry.

4.2.5 To clean the grinder accessory

1
Remove the grinder drive unit from the grinder
accessory.
2
Clean the parts separately with hot water and
washing-up liquid.
3
Use a dry and clean cloth to make the parts dry.
5

Storage

5.1 To put the product in storage

Caution! Do not wind the power cord around the
product.
● Disconnect the power plug from the power outlet.
● Make sure that all parts are dry.
● Put the product in a clean and dry place.
Caution! Make sure that there is no pressure on the
power cord.
6

Disposal

6.1 To discard the product

● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
7

Technical data

Technical data
Rated voltage
Power output
Volume
230 V, 50 Hz
500 W
1.2 l
2022_001