Replacing The Lateral Extension Of The Lifting Pad; Affixing The Extension Block - Sennheiser HSL 10 Mode D'emploi

Let your phone ring. If recording has been successful, the LED
Teaching ring tone 2:
Record ring tone 2 in the same way as described for ring 1, but press the "P2" button
6
until the LED
The LED flashes blue twice, if the recording was succesful.
In your headset you will hear a ring tone when the HSL 10 recognizes ring tone 1 or 2.

Replacing the lateral extension of the lifting pad

If the lateral extension is not long enough to lift up the handset or if the handset tends to slip
off the extension, you can install a longer one instead.
Replace the lateral extension as seen in the illustration.
8

Affixing the extension block

When you terminate a call via the headset, the HSL 10 usually hangs up the phone by lowering
the handset, which then pushes down the telephones hook button. With some telephone types,
however, this may not work properly. In these cases, the handset does not push down the hook
button sufficiently, and the call is not terminated. To solve this problem you can affix the
extension block to the hook button to ensure that it is pushed down sufficiently.
Affix the extension block to the hook button as seen in the illustration.
5
flashes red.
flashes red twice.
7