Adjusting The Lifting Height; Teaching The Ring Tones Of Your Telephone To The Hsl 10 - Sennheiser HSL 10 Mode D'emploi

Adjusting the lifting height

Press and hold down for two seconds both the "P2" button
6
LED alternately flashes red and blue.
Release the buttons. The lifting pad raises to the currently adjusted height.
7
Increase or decrease the lifting height by pressing the "P2"
6
(increase) button until you can hear the dial tone.
Save the settings by pressing and holding down for two seconds both the "P2" button
and the "P1" button

Teaching the ring tones of your telephone to the HSL 10

You can teach two different ring tones to your HSL 10. This is required if
• your telephone supports two different ring tones, e.g. for external and internal calls,
• you hear a ring tone in your headset although not your telephone, but another telephone in
the vicinity is ringing,
• you can not hear a ring tone through your headset even your telephone is ringing.
Teaching ring tone 1:
Set your telephone to ring tone 1. Make sure that ring tone 1 differs from the ring tones of
other telephones in the vicinity.
Adjust the ring tone level to comfort.
Press and hold the "P1" button
6
6
.
until the LED
and the "P1" button
(decrease) or "P1"
flashes blue.
. The